What are the rules that need to be paid during the operation of the plane grinder

1: What is the orientation of the positioning rules of the plane grinder, how is the equipment? It is good? It is understood that it should be reserved in the *** big sports space, and each foot screw is tight. Before and after the table, the left and right levels are within 0.04 / 1000mm. (The requirements of the device inverter need to be higher) 2: The selected grinding wheel should be able to accept the peripheral speed of 2000m / min or more, because if the speed is too low, it will easily leave traces, but the speed is too high, then a grinding wheel The price is much higher, others should pay special attention to the strict use of damage to the use of damage. If there is any condition, *** can also make the flange necessary to balance after the new sand wheel is installed. 3: Determining the spindle should be rotated in a clockwise direction. 4: Plane grinding machine hydraulic equipment planar grinder uses a viscosity of 46 hydraulic oil. The new machine needs to replace the hydraulic oil after three months, and will be replaced once a year, and the fuel tank must be cleaned together. 5: Plane grinder smooth equipment glossy oil uses a guide rail suction oil having a viscosity of 32. (Introduction USWARD 1 or 1405) confirms the oil tank (pool) oil per day to ensure that it is above the line. Check if the guide railway is smooth every week, the root isledon. It advocates cleaning every three months. The photolithiacity is raised regularly according to the specified. 6: Tissue around the plane grinding machine stops adjusting the left and right strokes during the workbench. When the workbench steel bear is loose, adjust it immediately. (This article is applicable to manual models) 7: flat grinding machine flushing and vacuum cleaning equipment cleaning and protection, *** can be cleaned every two weeks. Other ways to view the coolant, generally coolant to present pollution, to see and remove in time.

Related Posts