Plane grinder manufacturers introduction planar grinder structure

Planar grinder manufacturers introduce a variety of planes with higher surface quality of planar grinding machines requires higher planar processing and finishing, and is often used as a planar grinding method. The machine tool for plane grinding is a planar grinding machine, and the working appearance of the grinding wheel can be the circumferential outer table, or the end face can be The primary type and movement of the planar grinder manufacturer is elected as a grinding method of the grinding wheel, and the grinding machine spindle is in the horizontal layout; when the grinding wheel end face grinding is selected, the grinding machine spindle is pressed. When planar grinding, the workpiece can be mounted on a rectangular workbench for a backward movement, or on a circular workbench as a circumferential motion. According to the combination of the spindle layout and workbench shape, the general plane grinding machine can be divided into the following four categories: (1) Inlet bench torque, a plane grinder is in such a machine, and the workpiece is sucked by the rectangular electromagnetic table. The grinding wheel is rotated mainlight N, the table is longitudinally reciprocating F1, and the grinding wheel frame is bracketing vertical cutting movement F3 and the lateral feed moving F2. (2) Shax Mountain Table Planar Grinder In this machine, the grinding wheel is rotated from the main movement N, the rectangular table is longitudinally reciprocating f1, and the grinding wheel frame is intermittently cut into motion F2. (3) Vertical axial round plane grinding machine in such machine tool, the grinding wheel as a rotating main motion round work table rotation as a circular feed moving f1, and the grinding wheel frame is intermittently cut into motion F2. (4) In this machine, the wheel is rotated on such a machine, the wheel is rotated from the main motion N, the circular table rotation is rotated as a circular feed moving F1, and the grinding wheel frame is connected to the radial feedthrough of F2 and the intermittent vertical cut into Movement F3. In addition, the inversion of the table can be adjusted to the tilt position in order to grind the tapered surface.

Related Posts